logo
This shopping cart doesn't take orders,
Please CALL 1-800-992-9898


Main Entrance   |   View Shopping Cart   |   Place Order   |   Help

A/C Recovery & Recycling Equipment | Automotive Equipment | Bender (Electrical) | Cable Puller (Electrical) | Crimper | Cylinder High Pressure | Cylinder Low Pressure | Drain & Sewer Cleaner | Everything | Flange Spreader | Gauges | Hose, Fittings & Accessories | Hydraulic Cutter | Hydraulic Cutterheads | Hydraulic Knockout Punch | Hydraulic Pullers | Hydraulic Punch | Inflatable Jacks | Jacks | Load Cells | Lubrication Pumps & Accessories | Maintenance Sets | Mechanical Jacks | Mechanical Pullers | Mityvac | Motor (Low Pressure) | Nut Splitter | Pallet Truck | Pipe Bender (Automotive Exhaust) | Pipe Threader | Power Luber 14.4 Volt Cordless | Presses | Pump (Low Pressure) | Pump Air | Pump Electric | Pump Hand | Salt Spreaders | Snow Plows | Test Equipment | Torque Wrench | Torque Wrench Power Pumps | Vacuum Pump | Valve | Valve (Low Pressure) | Weaver Floor Jacks | Weaver Transmission Jack

200 Ton press used to press bushings and straighten rods
Our in house test equipment. Test bench for low pressure pumps, valves & motors, & one for high pressure ones. Test equipment for cylinders both low & high pressure. Test equipment for floor jack, snow plows, pallet trucks. electric tools and components, vacuum pumps, load cells.

Select a Mfg.
Enter quantity
to cart

 

Electrical Test Panel
Our in house electrical test panel is used to test all electric tools, motors, wires, switches, fields and armatures. We check for proper amp draw and proper running voltage.

Select a Mfg.
Enter quantity
to cart

 

Hydraulic Cylinder Bench for rod & tube alignment
Our in house test equipment. Test bench for low pressure pumps, valves & motors, & one for high pressure ones. Test equipment for cylinders both low & high pressure. Test equipment for floor jack, snow plows, pallet trucks. electric tools and components, vacuum pumps, load cells.

Select a Mfg.
Enter quantity
to cart

 

Hydraulic Cylinder Bench showing torque wrench w/capacity of 8" nut
Our in house test equipment. Test bench for low pressure pumps, valves & motors, & one for high pressure ones. Test equipment for cylinders both low & high pressure. Test equipment for floor jack, snow plows, pallet trucks. electric tools and components, vacuum pumps, load cells.

Select a Mfg.
Enter quantity
to cart

 

Hydraulic Cylinder Bench w/30,000 ft.lb. torque wrench
Our in house test equipment. Test bench for low pressure pumps, valves & motors, & one for high pressure ones. Test equipment for cylinders both low & high pressure. Test equipment for floor jack, snow plows, pallet trucks. electric tools and components, vacuum pumps, load cells.

Select a Mfg.
Enter quantity
to cart

 

Hydraulic Cylinder Bench showing long cylinder (40' capacity)
Our in house test equipment. Test bench for low pressure pumps, valves & motors, & one for high pressure ones. Test equipment for cylinders both low & high pressure. Test equipment for floor jack, snow plows, pallet trucks. electric tools and components, vacuum pumps, load cells.

Select a Mfg.
Enter quantity
to cart

 

Hydraulic Test Bench (high pressure)
This is our high pressure test bench. We use this one to test hand, air and electric pumps up to 10,000 PSI, each hose is coupled into a gauge to check pressure as the pump is running. We can test both single and two speed pumps and pumps for single and double acting cylinders. It is used to set overloads and to test electric valves.The electrical gauges show the amp draw on the motor as it builds pressure.

Select a Mfg.
Enter quantity
to cart

 

Hydraulic Test Bench (low Pressure)
This is our low pressure test bench, used to test pumps, motors and valves. It has a test pressure of 5000 PSI, speed range of 100 to 2400 RPM, it has a 100 HP and 50 HP electric motor drive, it can test up to 38 GPM plus the supplemental pump for another 20 GPM, the reservoir is 200 gallons. We have all adapters, fittings, mounting plates for all pumps and motors. Motors can be tested up to 670 ft-lbs in either direction. We can also test electric valves of all voltage. This bench takes all the quess work out of repairing, testing pumps, motors and valves.

Select a Mfg.
Enter quantity
to cart

 

Hydraulic Test Bench (low Pressure) reading the gauges
This is our low pressure test bench, used to test pumps, motors and valves. It has a test pressure of 5000 PSI, speed range of 100 to 2400 RPM, it has a 100 HP and 50 HP electric motor drive, it can test up to 38 GPM plus the supplemental pump for another 20 GPM, the reservoir is 200 gallons. We have all adapters, fittings, mounting plates for all pumps and motors. Motors can be tested up to 670 ft-lbs in either direction. We can also test electric valves of all voltage. This bench takes all the quess work out of repairing, testing pumps, motors and valves.

Select a Mfg.
Enter quantity
to cart

 

Hydraulic Test Bench (low Pressure) testing cylinders
This is our low pressure test bench, used to test pumps, motors and valves. It has a test pressure of 5000 PSI, speed range of 100 to 2400 RPM, it has a 100 HP and 50 HP electric motor drive, it can test up to 38 GPM plus the supplemental pump for another 20 GPM, the reservoir is 200 gallons. We have all adapters, fittings, mounting plates for all pumps and motors. Motors can be tested up to 670 ft-lbs in either direction. We can also test electric valves of all voltage. This bench takes all the quess work out of repairing, testing pumps, motors and valves.

Select a Mfg.
Enter quantity
to cart

 

Next   0    1   



A & A Hydraulic
5301 West 161st. Street
Cleveland,Ohio 44142
Email: Bernie@hydraulicparts.com
Phone: 800-992-9898
Fax: 800-992-1886
http://www.hydraulicparts.com